Washing Unit – GS2600

$0.00

Out of stock

SKU: WSH-NT-GS1-3 Category:

Description

**Manufactured to order; please contact us directly for quotes at (800)296-0351 or [email protected]**

 

SYSTEM INCLUDES

  • Two Stainless Steel Baskets (GS2102)
  • Automatic Chemical Injection System Three chemical pumps Initial detergent (FK270-G), disinfecting (FG350-G), rinse agent (RP355-G)
  • One year parts and labor warranty

The GS2600 Respirator Washer is ideal for light to medium volume cleaning and disinfecting applications. Easily accommodates 16 full-face or 32 half-masks per cycle. Will also accommodate tanks. Specially programmed cycle to eliminate excess foaming in the wash tank and the need for foam control chemistries. This cycle is designed with a pre-wash cycle, which utilizes a specially formulated low foaming detergent to clean masks. Followed by a 10 minute disinfect cycle guaranteeing proper equipment disinfection. Finally, a series of fresh water rinses to complete a comprehensive fully automatic wash.

Energy Efficient, Easy-to-Use

Automatic Detergent and Rinse Agent Injection System Door activated PAUSE safety feature 100% fresh water rinse. A true multi-use washer that automatically pre-cleans, disinfects, and rinses at the push of a button. The automatic Detergent and Rinse Agent injection option ensures a precise wash – cycle after cycle.

The GS2600 is shipped with a Thermostatic Mixing Valve allowing the user to provide a low temperature bath that assures a minimum of wear and tear on personal protective equipment.

GUARANTEED A one year parts and labor warranty, and compliance with ANSI, NFPA, OSHA, and CSA Standards. The GS2600 incorporates a combination of the most effective detergents, disinfectants, and rinse agents to ensure the best automatic wash possible and protect workers against today’s health threats.

Guaranteed not to harm the facemasks of any respirator manufacturer where immersion in water is allowed.

INSTALLATION

  • 8 foot 3 wire power cord
  • 8 foot 3/4″ ID flexible drain hose
  • 4 foot flexible water intake hose with 3/4 ” female GHT

SPECIFICATIONS

  • Electrical Power Cord: 8 ft Plug: NEMA 5-15P 15 Amp
  • Power Supply: 120 Volts, 50/60 Hz, 14 Amp, 1 phase
  • Water Supply Inlet: 3/8″ hose ID with a 3/4″ GHT
  • Supply pressure: 50 psi (Recommended) (Max: 75, Min: 40)
  • Temperature: User supplied (110°F recommended)
  • Capacity per Cycle Full-face Masks: 16 Half-face Masks: 32 Baskets: 2 (20″ x 20″ x 7″(H))
  • Dimensions Height: 39″ Depth: 29″ Length: 36″ Weight: 500 pounds (CRATED)
  • Cycle Time 30 minutes
  • Capacity per Cycle Full-face Masks: 16 Half-face Masks: 32 Baskets: 2 (20″ x 20″ x 7″(H))